About this 3D model

This is a set of coasters designed like vinyl records. Store all 4 vinyl coasters on a record player coaster stand. I've included a fully painted profile which includes 4 coasters, the coaster stand, and the 4 feet, on 3 separate plates: Coasters plate: Set for PETG (you can switch this to PLA and it'll print fine but I printed these in PETG for better heat resistance with hot mugs) Coaster record player stand plate: This is set up for printing in PLA. You can print it in PETG but I prefer to print in PLA where possible and it works great for this. Feet plate: This plate is set up for printing in TPU. These need to be printed in TPU but are optional so if you don't have TPU or don't want to print it, the whole thing will be fine without these. Assembly Once printed, simply slot the needle arm into place as shown in the photos, and then slot the records onto the center pin. If you did print the TPU feet, they should just slot in place but a single drop of glue will help ensure they stay put. Non AMS Printing The record player stand has more detail so you're welcome to experiement with ways of printing that without an AMS using filament changes (or just printing in one colour and then painting), but I've also included a profile (and STL if you want to slice for yourself) for a version of the record coasters that allows you to print them multi-colour by changing the filament for the last two layers (if printing at 0.1mm layer height) which will then only affect the label.