About this 3D model

UPDATE 30.10.2024: I increased the size of the slider for 4% to help with assembly. I remixed the original model to allow different colors for clean and dirty sides. File dishwasher_body_magnets_v2.stl has 3 holes for phi10x4 mm magnets. File dishwasher_body_CUSTOM_magnets_v2.stl has negative parts modifiers, which you can scale to fit your magnet size in my print profile . Otherwise split stl to parts and set negative part. When changing a height of magnet hole you should also adjust Y position of it to start at the bottom*. Calculate new position using the following formula: Y_new = -5.08 + your_new_hole_height / 2 For example if you want a 5 mm magnet hole: scale Y size of a magnet hole to 5 mm, set Y position of a magnet hole to Y = -5.08 + 5/2 = -2.58 mm *Bambu studio sets positions of parts based on their center of gravity. When scaling a model it scales it uniformly from its center of gravity in all directions. Therefore we need to change the position of holes to sit flat on a buildplate. When setting position of the magnet hole we need to set position of its center of gravity from center of gravity of a whole model. The formula I provided does that.