About this 3D model

Sailing the mighty high seas, this massive ship is armed with a harpoon gun, 10 cannons on each side, a string of smaller ones on the front mast, and a huge one on the main deck. It has seven gobbos, one large weird Orc (https://www.myminifactory.com/object/3d-print-weird-pirate-orc-273804), a harpoon gunner (https://www.myminifactory.com/object/3d-print-harpoon-gunner-270722)A big cannon with gobbo crew (https://www.myminifactory.com/object/3d-print-big-cannon-and-goblin-crew-272084) and definitely not three gobbos in a coat steering the awesome ship (https://www.myminifactory.com/object/3d-print-3-gobbos-in-a-coat-276432).Watch out for the front, it's a little pinchy ;)There are two sets of files for the captains quarters, front deck and hull of the ship. If you are using a smaller printer, these files have been sliced into more printable pieces for you, the hull in one piece is 239mm tall, 148mm wide and 123mm long so unless you have a large printer build plate, you will have to print the sliced version of it.Everything is pre-supported professionally by Atlas3DSS*EDIT* as of 2025, I have modified the decks and sails so they are inserted via a square peg, to stop spinning or wobbling of sails. The new updated decks and sails can be found in the zip file "new sails and decks". *EDIT* As of April 2026, I have slightly adjusted the main door in the captains quarters as it was too difficult to fit into the hull. This new captains quarters is found within the "new deck and sails" zip file.