About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG Overture black Transmission Distance: 0.3 PETG overture red Transmission Distance: 2.5 PETG overture orange Transmission Distance: 4 PETG Overture White Transmission Distance: 4.8 Swap Instructions: Start with black At layer #7 (0.64mm) swap to red At layer #8 (0.72mm) swap to orange At layer #9 (0.8mm) swap to White for the rest.