About this 3D model

Remixed to fit the seldom used CR 1/3N battery type, which should be very close to the DL 1/3N battery type as well. Voltages of those batteries should be around 3v but some go up to 3.7v. This will easily hold a single battery or it can hold up to 4 batteries within the handy carrying case. Printer: Bambu Labs X1 Carbon Filament: PLA or PETG will work fine. Layer Height: 0.2mm Wall Loops: 4 Top Layers: 4 Bottom Layers: 4 Sparse fill: 15% Sparse pattern: gyroid