About this 3D model

3d miniature of Venice, Italy! Model created in Blender primarily using data from the Blosm addon. Check out my collection of other miniature cities: https://makerworld.com/en/u/1935755220/collections/146964 European miniatures collection: https://makerworld.com/en/u/1935755220/collections/497061 Slicing & Printing Details This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. I highly recommend using Arachne walls when slicing this model! This might take considerably longer to slice depending on your computer's hardware, but it often it includes smaller details & buildings that ‘Classic’ walls might omit. Unfortunately MakerWorld's verification process times out when I try to upload my print profile with Arachne walls enabled by default, so you'll most likely need to change this setting yourself . If slicing with Arachne walls causes issues or takes an extended period of time, try switching back to ‘Classic’ walls and reducing the line/extrusion width of outer walls (external perimeters) to around 0.4mm instead. Try using a 0.2mm nozzle (0.08mm layer heights) for even finer detail! Framing Details This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs. Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ And blue printer paper: https://www.amazon.com/dp/B00006IDQT I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities. Gif of the Printable Frame A frame is not required! This model looks great by itself and can be displayed almost anywhere. Membership Become a Subscriber to obtain a Commercial License and sell physical prints of my models! License is valid as long as the subscription is active.