About this 3D model

This gyroscope model is designed for classroom demonstrations. Therefore, it is designed to be as large as possible. The second plate is the base, which can be omitted if it is not used as a display piece. It is important to note that the position of the central rotor needs to be carefully leveled during installation. To assemble the gyroscope, you will need additional accessories, including: 12 M3*12 flat head screws (an additional 2 screws are needed if you print the base) 6 608 bearings. The cheapest metal bearings on Taobao cannot be used here. I used ceramic bearings, which are not much more expensive. One 156 mm long carbon fiber tube. I couldn't find the right size tube directly, so I used a 200 mm tube and cut it manually.