About this 3D model

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Used the hands to create a new armed hand. Used the legs to create the holsters You will find more of such stuff in my collections: https://makerworld.com/en/u/2185604356/collections Description As some people do not read/understand the description: The guns do not fit for the original hands, but with the UGH linked below! A complete set of Desert Eagle 50, including UGH version, detailed model and holsters. You can use either the static hands or the UGH version together with the holsters or any combination of these. UGH - Universal grip hand Printing: The STL files are already aligned as they should be printed. Layer height Material Brim Paint-on supports Holsters 0.15mm PETG X X Armed hands ≤0.15mm PETG/PLA ? X DE 50 detailed ≤0.15mm PLA - X Holsters: Remove the supports immediately after printing Make sure that all filament debris is removed from all parts Slide the holster over the thigh Take a look at the illustration. Pay attention to the position, the fastening and how far it has to go in below the thigh Now carefully slide in the thigh frame