About this 3D model

This is for the original heatbed and cable. It will not fit the updated hardware. A simple cable guide for the A1 to limit side-to-side bending. Minimal assembly is required since it doesn't fit on the bed as one piece but it is mostly print in place. Just snap the 2 chains together by squeezing the sides of the long chain and pressing them together. The ends attach in the same way that the official Bambu Cable Protector does. I have added slots to allow for easy removal of both ends. I recommend using PETG or another more heat resistant filament, just to be safe. -There are built in spring clips that will hold the cable in the tracks without pinching. -The larger end attaches to the base of the printer with an integrated cable protector. -The short end is double-jointed to allow more movement, as the cable tends to bend upwards. -Easy to remove connectors. Update: 10/11/2024 I am changing the license to a “Standard Digital License” on this to participate in the new Makerworld Exclusive Program. However you can still feel free to upload your own remixes to Makerworld under the old license terms. Off-site distribution is no longer an option though due to the requirements of the program. The previous license: Creative Commons Attribution