About this 3D model

Night light Is there a cooler idea than a full moon as night light? Look at this Attribution Credits: NASA/Goddard/Lunar Reconnaissance Orbiter Let's print one It's a good idea to use a light filament like a white one or a translucent one. The IKEA MÖRKRÄDD LED lamp consumes less than 0.5 W there is no temperature risk This is a two part print, you need this lithophane and one of the covers i made for the Mörkrädd. To let the full moon shine at his best i would chose the closed cover. This is the one i used for the pictures above. https://makerworld.com/en/models/171065#profileId-187782 Great! how can i make my own lithophane with my own pictures? You need a picture, no matter if color or gray scale, no matter if picture or screenshot, everything works. Step 1 upload your image https://tool.itslitho.com/UploadImg Step 2 use this settings Don't change the settings for: Width 80 mm Height 80 mm Frame Thickness 2 mm Frame Depth 2 mm Frame Angle 60° Settings you may change You can change Min Thick and Max Thick and also the mm per pixel Quality options. A Min Thick of 0.6 or 0.8 mm is recommended especially if the picture has big light areas. Where to get the LED Lamp? (5€/$ for a set of two) More covers for the MÖRKRÄDD https://makerworld.com/en/u/3700045592/collections/509009