About this 3D model

The first of 3 watch stands I aim to release. Like my other designs, I tried to incorporate an “industrial” theme into these stands. They look especially good with G-SHOCK branded watches however I'm sure they will suit others. Incorporated is an optional strap tensioner for those with large wrists/ straps. Simply tighten or loosen the M3 screw to adjust the tensioner. These stands look great with the optional M3 countersunk washers, however button head screws will work just fine on their own if you prefer. Assembly Tip Screw Cradle part B to the arm first before screwing the cradle together. Print at 25% gyroid infill for a good level of strength. Add a little glue to the guide notches on cradle part B. This will help prevent the cradle from moving when removing/ displaying your watch. Screws required to complete: 2 M3x12mm countersunk or button head screws to attach the arm to the base. 2 M3x18mm countersunk or button head screws to attach the watch cradle to the arm. 1 M3x10mm countersunk or button head screw to lock cradle parts A and B together. 1 M3x8mm screw for the optional Strap tensioner.