About this 3D model
A great handy bundle 28mm scale Cyberpunk inspired 3D printable terrain to enhance the look of your gaming tables. Included are the Apartment Building, SuperNoodle Building, Small Restaurant Building, Cheap Hotel Building, Red Dragon Ramen Bar. These will need to be scaled by approx. 130% if you intend to use with EdoKanto range of buildings which are natively closer to 35mm scale. The Apartment Building: Three upper floors are included to make a stackable apartment block! Features internal stairways for access to the upper levels, along with removable doors and removable roller shutter door on the front. Dimensions:Lower - 175mm x 179mm x 53mmUpper - 193mm x 197mm x 53mmRoof - 190mm x 184mm x 49mm SuperNoodle Building: Prints as three main parts, with the upper floor and roof removable for interior play. The front door is removable and prints separately. The main store sign is a separate print. Dimensions:Lower - 111mm x 107mm x 49mmUpper - 111mm x 112mm x 85mmRoof - 114mm x 100mm x 33mm Small Restaurant Building: Prints as three main parts, with the upper floor and roof removable for interior play. Features an optional clip-on set of ducting along one side with OpenLOCK connectors, along with shutters for front and back that also clip on and off depending on your needs. The front door is removable and prints separately. The main store sign is a separate print. Dimensions:Lower - 77mm x 96mm x 54mmUpper - 78mm x 108mm x 72mmRoof - 77mm x 100mm x 38mm Cheap Hotel: A 3D printable 28mm scale cyberpunk influenced Hotel/office building ideal for futuristic themed gaming tables. Prints as a lower floor, with the upper floors and the roof removable for interior play. Supplied with a lower section, and a choice of two upper floors that can stack to whatever height you need. Each storey comes with the option for an interior floor and without. OpenLOCK ports are available on the front to take a balcony or section of walkway that will connect to other buildings.The clip-on signage comes as either a 'solid' printed version or as the option to print the parts separately. Dimensions:Lower - 151mm x 190mm x 53mmUpper - 192mm x 197mm x 53mmRoof - 195mm x 195mm x 25mmBalcony - 36mm x 183mm x 25mm Red Dragon Ramen Bar: A 3D printable 28mm scale cyberpunk influenced Ramen Bar great for futuristic themed gaming tables. Prints as two main parts, with the roof removable for interior play.Comes with two main versions of the lower building for a little bit of variation - one open on all sides, and one with shutters down on three sides. Two different roofs are supplied with the Red Dragon logo. Also comes with optional printable shelving for inside and a small stove cooker. Dimensions:Lower - 180mm x 127mm x 53mmRoof A - 184mm x 116mm x 53mmRoof B - 134mm x 90mm x 54mm No need for supports for FDM printing. Recommended printing resolution - 0.2mm. Everything is ready to throw into your slicer of choice and start printing.