About this 3D model

A fantastically stable way to mount MFDs to 4080 extrusion-based clamps. The MFDs are very rigidly held, not yielding even under hurried button presses. Building one MFD mount requires: 6pcs M3x15mm 4pcs M3x(5-8)mm, and 10 M3*4.6*6 heat-set inserts. Get any M3 heat-set inserts advertised for Vorons. When installing the heat-set inserts, ensure they are recessed into and not flush with the surface. You can get the model here: https://a360.co/3S28Yhl