About this 3D model

Picatinny MP7 Grip by Qwerm A picatinny version of the folding grip from the MP7A1. This is designed with some tight tolerances so it will most likely require some post processing to get things to move smoothly. I recommend using a file and then running the moving parts back and forth until they move smoothly. Print Orientation: Check included pictures for recommended print orientations. Recommended Print Settings: Layer Height: 0.2mm Wall Line Count: 4 Infill Density: 30%+ Support: Yes Fuzzy Skin: No Required Hardware: 1x M5 30mm Socket Head Screw 1x M5 Hex Nut 1x 6mm E-Clip 1x 1/8" x 1" Roll Pin 1x 1 1/2" x 1/4" Compression Spring