About this 3D model
龟仙人和悟空Roshi&Goku： Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm 打印100%填充，第一层0.16mm，其他层高0.04mm Filaments Used:(Can be replaced with ‘K’ materials, other brands of materials please verify the TD value) 材料使用：（可以用K家材料替代，其它品牌材料请自行校验TD值） PLA BambuLab Basic Jade White Transmission Distance: 5 白色 PLA BambuLab Basic Yellow Transmission Distance: 6 黄色 PLA BambuLab Bronze Transmission Distance: 0.8 古铜色 PLA BambuLab Basic Black Transmission Distance: 0.6 黑色 Swap Instructions: 扫层说明： Start with Jade White 以白色开始 At layer #6 (0.36mm) swap to Yellow 第六层开始换成黄色 At layer #8 (0.44mm) swap to Bronze 第8层开始换成古铜色 At layer #12 (0.6mm) swap to Black for the rest. 第12层换成黑色直到打印结束 ----------------------------------------------------------以下雷同就不翻译了---------------------------------------------------- 龟仙人Master Roshi： Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Beige (or skin) Transmission Distance: 8 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Black Transmission Distance: 0.6 Swap Instructions: Start with Jade White At layer #6 (0.36mm) swap to Beige At layer #8 (0.44mm) swap to Green At layer #12 (0.6mm) swap to Brown At layer #16 (0.76mm) swap to Black for the rest. ---------------------------------------------------------------------------------------------------------------------------------------------- 贝吉塔Vegeta： Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 Swap Instructions: Start with Jade White At layer #7 (0.4mm) swap to Yellow At layer #11 (0.56mm) swap to Blue At layer #14 (0.68mm) swap to Black for the rest. ---------------------------------------------------------------------------------------------------------------------------- 孙悟空Son Goku： Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 Swap Instructions: Start with Jade White At layer #8 (0.44mm) swap to Orange At layer #12 (0.6mm) swap to Blue At layer #14 (0.68mm) swap to Black for the rest. ----------------------------------------------------------------------------------------------------------------------- 以上文件是由hueforge创建，想了解了解更多的请看以下视频：