About this 3D model

Stinger 2 magazine cover with long Picatinny rail Extra long Picatinny rail on an alternative magazine cover for the standard magazine of the Steambow Stinger AR 6 II Tactical or Compact The STL is provided free of charge! If you like the cover and would like to support us and the further development of print files, please send any amount via Paypal to www.paypal.me/3dboard/ The cover is optimized for use with the StingerLock . StingerLock. This cover with a straight Picatinny rail is ideal for short distances up to approx. 10 meters. A cover with a forward inclined Picatinny rail, which makes it easier to adjust a Red-Dot or a scope at longer distances, can be found here . Printing instructions: It should be printed with supports. An infill of 80% is recommended for best toughness. I'm fine with 25% Gyrooid. At least PETG, better PETG-CF or comparable should be used as printing material. The spring of the original magazine cover and the two screws with which it is attached can also be used on the printed cover. However, it is recommended to melt short M3 threaded inserts into the cover and to fix the spring with 4mm long M3 screws. This makes it easier to swap the spring between the different versions of the cover.