About this 3D model

Model description Simple to print zip tie mount. This item prints in under 8 minutes and only requires 2,5g of filament. It features a centered hole to screw it to wood etc. - you can also use double-sided tape, but check the link at the bottom of this detail page for the tape-version. If you want to mass-print them, consider my remixed model with a set 15 pieces to cut-away. Find it here: https://makerworld.com/en/models/250254#profileId-266495 Prints fine on all Bambulab printers Usecase: A "zip tie mount" is a small plastic or metal device designed to secure zip ties (also known as cable ties) to a surface. These mounts typically have an adhesive backing that allows them to be attached to various surfaces, such as walls, ceilings, or panels. They often have a hole or slot through which a zip tie can be threaded, allowing cables, wires, or other objects to be neatly secured in place. Zip tie mounts are commonly used in cable management applications to organize and route wires and cables in a clean and orderly manner. By securing zip ties to mounts, cables can be kept out of the way, reducing clutter and potential tripping hazards. Additionally, zip tie mounts can help protect cables from damage caused by movement or abrasion. I hope you enjoy this design. Feel free to follow me for more useful models from the categories tools, household, office and gadgets Changelog - V1: initial release Special notes for printing this model with your own profile - none, you can go with the default settings Tested filaments ✅ PLA ✅ PETG ❌ ASA ❌ ABS ❌ Nylon ❌ Polycarbonate ❌ TPU For use with adhesive tape: If you are looking for a zip tie mount you can use with adhesive tape, consider to look at my other model: https://makerworld.com/en/models/894796#profileId-852469