About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Esun Black Transmission Distance: 5 PLA+ Esun Red Transmission Distance: 3.2 PLA+ Esun Orange Transmission Distance: 5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #15 (1.28mm) swap to Lemon Yellow for the rest.