About this 3D model

A small, simple fridge magnet (embedded) with text ‘Love’ and thin frame embossed on one side. Rounded edges for esthetics. This one uses different front than the type-1 model here . Works best with 0.2mm nozzle in its original size. Model size is approx. 63 x 35 x 5 mm Sample in the photo is printed with: Bambu lab PLA matte white for text & border Bambu lab PLA matte red for plate 0.2mm nozzle on X1C Embedded Magnet: The model has internal space for 8x3 mm cylindrical magnets like this one . With layer height of 0.10, insert pause at layer 41 to insert the magnet, press it down firmly and resume print. * This model designs to fit the magnet I have - 8.1mm x 3mm hole - and it is a snug fit, check yours for tolerances. If you opt to use different layer height, please check your sliced model in [Prepare] tab for which layer to insert pause. * Remember that layer pause happens before printing in that layer - so best place to pause is the first layer that bridges over the magnet pocket starts to print. My print profile: 0.2mm nozzle 0.10mm layer height wall generator Arachne Ironing top surfaces (* not printing face down because the text is embossed slightly) 15% Gyroid infill no support needed Thanks for checking!