About this 3D model

A typical 256 by 256 printer can print at 205% using multiple plates. Use as many body 2 sections to extend and make a GIANT. In testing two of the body 2’s made the most realistic shape of snake. There are internal stabilizersthat need to be separated, so just flex the snake until you feel it release.PARTS:1. Body 12. Body 23. Body 34. Eyes5. Head6. Jaw7. Inside Mouth 18. Inside Mouth 2 9. 3mf ScalingTest printed from 70% to 205%. At 70% suggest making sure that detect thin walls is enabled,or change from classic walls to archane walls.Eyes:100% - 6mm133% - 8mm166% - 10mm200% - 12mmGoing bigger? Divide output eye size by 6 to get approximate percentage. I.E If you want to use18mm eyes then 18/6= 3 or 300%. These are starting points TEST PRINT!!!!These are safe guides. Test print the head to find what size works best for you AND the brand ofglass eyes as they are not all EXACTLY the same.Printing Parameters3 walls10%% crosshatch/10% gyroid.20 layer heightIf downscaling then make sure to use detect thin walls or archane wall generationEnjoy the print PLEASE READ:All Raki-Box designs are protected under Copyright Law.Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization. To sell PRINTS of my designs, you must obtain authorization by joining the "Commercial" Tier of our Patreon or MMF Tribe. If you like this design, please check out our Socials and give a follow. Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D-printed parts can create sharp edges and/or points. Not recommended for children under 3.