About this 3D model

Great Scott! The future is now, and with 3D printing, we don't need conventional paths. Where we're going, we can print anything – a future built layer by layer, innovation by innovation! If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)! Slice it, print it, done. If you are not using the one-click printing method, or are not using a Bambu printer, read on: Print Instructions (manual settings): print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filament Swaps (4 colors, 4 swaps): Start with Black At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Beige At layer #19 (1.6mm) swap to White Filament I've used: Black: Extrudr PLA NX2 matt schwarz * Fire Engine Red: PLA+ Esun Fire Engine Red * Beige: Bambu Lab PLA Basic “Beige” White: Extrudr PLA NX2 matt weiß * Notes: *The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :) I am not affiliated with Universal or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.