About this 3D model

3 slow flashing color changing LEDs1 spst on\off switch 14.5x9mm 1 tp 4056 charging board1 3.7v lipo drone battery 44x25x10mm4 6x3mm round magnets gluehookup wiresoldering pen and solder solder hook up wire to the magnets, pull the wires through the holes and glue magnets in placeglue the top and bottom of the base together clamp or hold till glue is set i used 2 sided tape to hold the battery in placeand glued the tp4056 to the bottom base with mitreapel CA glue