About this 3D model

A modular set of gates that could be used for a cemetery or a garden or palace/mansion. All three gates have been designed to have gates that open and close on hinges, this is done by printing the gates in two parts and glueing them together with the gates sitting in the hinges. All modular parts have small slots to fit 2x1mm magnets to make the pieces connectable. There are three different size pillars. Large, medium and small. Large pillars have magnet slots on top to fit a selection of four different accessories to decorate the pillars. A Smaller nozzle is recommended for this one to get all the fence details, and also a good calibration of the first layer so things dont turn out flat and for the hinges to work. The four decorations include: Plain top Lamp Orb Gargoyle Included Items: Base Geometry: PrintVariation1 FDM: Each model split into pieces to be printed with FDM. Requires Assembly A high resolution is recommended for better details, (less than 0.1mm layer height with a 0.2mm nozzle) This is best printed on a flat print surface (not on a raft), this is so the models will glue together flat and seamlessly without gaps. A well leveled bed with a good thickness first layer is recommended for best results. Updates History: 2026-02-13: Reduced optimisation to increase fedility and added more details on stone for resin printing. You can find more of my items at my website at www.tabletopminis.com For updates, mini painting and printing you can also follow me on: facebook: www.facebook.com/tabletopminis3dprints instagram: www.instagram.com/tabletopminiatures