About this 3D model

Remember if you want to scale, do it only with x and y axis, z must be the same as original as its a hueforge model, which means its filament painting technique Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: pla JAYO Black Transmission Distance: 0.3 PLA Sunlu Matte Blue Transmission Distance: 3 PLA Sunlu gray Transmission Distance: 6 PLA Sunlu Matte White Transmission Distance: 5 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #11 (0.96mm) swap to gray At layer #13 (1.12mm) swap to White for the rest.