About this 3D model

Need a new cozy light for your office or bed desk? Then you need try out “Drippy” The diameter is 77mm and the height is 106,5mm. Assembly is pretty straight forward. The LED is mounted, either with a 4mm low profile bolt (as I did) or with the included double sided tape (Using the Bambu Lab LED lamp Kit 001 ). The cable and swithc is guided to the buttom of the base where it can be snapped into the cable guide. The lamp shape/cover simply slides over the base and is held in place with friction. Nothing fancy, I made this short video showing how is should be assembled: Light Source: The LED I used in my lamp is this one: https://shorturl.at/szBJQ The Bambu Lab LED lamp Kit 001 will also work. (Use the included double sided tape for mounting) https://eu.store.bambulab.com/products/led-lamp-kit-001 The pocket for the LED light measures 60mm i diameter - so any LED you can find with this size should fit. My lamps are printed with these filaments: Bambu Lab PLA Matte Lemon Yellow Sunlu PLA+ White Bambu Lab PLA Matte Lilac Purple Bambu Lab PLA Basic Cyan Licensing All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website. For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this. How to Support Me If you like my designs, please give them a ‘like’ as this helps the model being more visible to other users. Also please consider donating via https://www.buymeacoffee.com/make3d All support is highly appreciated!