About this 3D model

Geometric wall-mounted self-watering planter (hanging) with quick water control and refilling. Designed to ensure perfect irrigation of the plant root system. For printing, I recommend using the attached files in STEP format. No supports needed. Printing recommendations: - Use PETg, ABS or ASA, do not use PLA. - set a minimum of 4 walls and 10 - 15% infill to ensure the water permeability of the pot Enjoy! I will be glad if you share your colour combinations! Assembly instructions Note: I used two 6x30 mm dowels and two 4x40 mm screws for fixing to the wall.