About this 3D model

This is a Frankie, a MixnMatch Buddy that that you need two files for: you will need to print a body file (keychain hole/without, multicolor/single) and a wing file (AMS multicolor/3color layer change/single). Once everything is printed, just clip the wings in! When Red and blue originally came out my dad played red, and named his starter Frankie. Anything designed by me with the MixnMatch label in the title, will all be able to be used interchangeably if it is the correct body part- all wings will work with the wing slots. That's right- you want a luna moth body with these dragon wings? Print these wings and that body instead! Prefer the fire moth wings, but the Charizard (inspired) body more? print that body and those wings! No supports are needed for printing: Body 2-3 walls 10%gyroid infill Wings 2-3 walls 15-20% gyroid infill - I recommend a higher infill on these just so that they are a little more sturdy ( they have a thickness around 3.0 -3.6 mm) There will be other MixnMatch Buddies uploaded…to mix and match! OG Dragon (This one, OG just stands for original, as it was the first dragon designed in the set, I am not name creative) Faerie Dragon Frankie the Charizard/Fire dragon Others completed but needing uploading: Fire moth Luna moth Moonlight moth This is a Private Use file only. If you would like to sell them, please purchase the commercial license file over at cults HERE . Notes: The wings should not be constantly switched out - there is a chance for wear on the open wing link with weaker materials like matte. The idea I was going for booth wise was that a child could pick and choose there favorite parts to have their own unique buddy that is unique and special that they “helped” create. If the wings need to be removed, hold the wing as close to the open link as possible and turn the wing so the opening is at the back when you pull. Happy printing!