About this 3D model

Remix of this design here: https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame I edited this to accommodate a better individual fan shroud on the bottom fan which directed airflow better. I also opened up the front more to allow even more visibility for timelapses, general viewing, etc. I added a small hole next to the LED mount for those looking to feed an LED in from the outside of the shroud instead of the inside. The smaller fan shroud I used on my system, which you can see in the image, is this one here: http://www.thingiverse.com/thing:1255573 Print Settings Printer Brand: Printrbot Printer: Simple White Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: I have a heated bed, so you may need a raft. I set my bed to 70 degrees to ensure there wouldn't be any warping, and also left the bottom fan off for the first 4 layers. Then I set it to 100% for the rest of the print. How I Designed This This was a previous design from Almond Lee, located here: https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame I used TinkerCAD to edit the STL and remove material in the places I needed to open up. Category: 3D Printer Parts