About this 3D model

Small, easy to build, and fun to fly! 520 mm wingspan AUW: Not more than 350 g Weight range: 250 g – 350 g My setup was 350 g AUW using Polymaker LW-PLA. Foaming LW-PLA or LW-ASA will be even better! I recommend building the plane as light as possible to achieve the best flight characteristics. Designed for FPV and flight controllers. Also works well for LOS flying. If you have problems or need help building or setting up the plane, you can contact me! The best way is to join my Facebook group: https://www.facebook.com/groups/c3eaero/ What You Need FC: SpeedyBee Mini Wing, or any small FC ESC: 20–30 A FPV: Analog or digital FPV with a nano camera Servos: 4x Emax ES9051 Motor: 1507 T-Motor or BrotherHobby 4S variant Propeller: 2S: 5x5 or 4.1x4.1 3S: 4.1x4.1 Battery: 2S 18650 or 3S LiPo, 550–850 mAh Main spar: 1x 3x350 mm Aileron spar: 2x 3x160 mm V-tail spar: 2x 1.2x100 mm pushrod / carbon-fiber rod Other parts: 2x M3 screws for the hatch 2x M2 screws for the camera Double-sided tape for the FC and VTX CA glue CG: Marked under the wings.