About this 3D model

Cool wolf howling at the moon. Multicolor design mde with Hueforge. No AMS needed. You can print this with every printer with manual pause at specific layer high. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA Overture Matte Yellow Transmission Distance: 3.6 PETG JAYO White Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Marine Blue At layer #13 (1.12mm) swap to Yellow At layer #22 (1.84mm) swap to White for the rest.