About this 3D model

Disclaimer: This is a fan-made fan art design and not an official Brand product. It is inspired by their style but is completely independent. This model is NOT included in the Commercial License Subscription and must only be printed for personal use! This is a Vintage Esso man Inspired Fan Art lightbox with place for a chargeable18650 battery, TP4056 USB-C / Micro USB card and an on/off button Printing tips: I used Bambu Labs Basic PLA with standard settings other than these: Temperature: 210 º Intial layer 67 º Textured pei 0,20mm layer height Quality: Go to Preferences ( ctrl + P ) an activate developer settings Arachne Wall generator 50º Wall transitioning threshold angle 1,03 First Layer Flow Ratio Strength : 20% Infill/wall overlap Speed: 30 Intial layer 60 Intial layer infill 100 Outer wall Support: Enable support Tree(auto) type Tree slim Style On build plate only Others: No-brim Brim type 45mm Prime Tower width 50 Prime volume Order color printing from l ightest to darkest color Make sure you have a good grip on the build plate. I use Textured pei plate, with temperature 67 The design process: Designed from a picture found on internet by me in Vector Magic and Fusion 360 Size: Height: 237mm Width: 126mm Depth: 40mm Parts I used: 18650 Battery On/Off button TP4056 Charger module LED stripe I'm just a hobbyist, trying to make some things, not a professional designer (Please keep this in mind if you post a review)