About this 3D model

For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file, as the 3mf file is pre-colored and pre sliced with the pause for the magnets. This New OG Flipster design is a bit of a funky one and uses a different magnet pattern. It uses a 2x3 magnet pattern so the pickles move vertically along the serrations, instead of around. Reason being is when they are flipped inside out the serrated edges fit inside one another and the pickle slices slide back and forth. The magnets are embedded inside the halves while the printer is paused, just like the kickflip decks. If you are wondering about magnet placement please check out this short video 1https://www.patreon.com/posts/kickflip-magnet-121228896?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link For the best functioning fidgets I print them against a textured build plate. I use the following magnets... (3) 8x2mm magnets in each hole - https://a.co/d/e1kOEHF I have found it easiest to hold the magnets in a stack and put the stack into the hole and slide the stack off into the next hole. Place the magnets into each of the 6 holes and flip the stack of magnets and repeat the process in the second pickle. Resume printing and the printer will print over top of the magnets and you will be ready to fidget as soon as the model is done printing. These pickle slices have got some really great textures, if you are into textures. For Filaments I used... Stronghero3D Summer Green PLA for the Outside - https://a.co/d/caYG5lriSANMATE PLA+ Yellow & Green PLA for the Inside - https://a.co/d/iYS6uxzZIRO Translucent Green PLA for the Center - https://a.co/d/aWSq6dBKingroon White PLA - https://a.co/d/i1qri7FAll of these models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mm (Maximum) layer height. I use the 4 Color AMS system to print the models in color. Please let me know if you have any questions. Thank you! Mike DISCLAIMER: Not a toy for children. Contains small parts and strong magnets. Magnets can be dangerous or fatal if swallowed! Not responsible for improper use or any damages caused by the parts of this item or the magnets. Proper safety, storage, precautions, and use are the buyer’s responsibility.