About this 3D model

Cherry Blossoms in the foreground providing a colour contrast to the pagoda in the moonlight. I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. Final Size is 150x100mm If you resize the model from 150 x 100 make sure you do NOT scale the Z axis or the print colours will not be in the same position If you would like to print a frame for it, i have a design here: https://makerworld.com/en/models/173529#profileId-190693 I have designed a box to hold 100x100 or 100x150 sized prints that I make here: https://makerworld.com/en/models/182399#profileId-200917 Please post a picture of your printed copy! I'd love to see it! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0 PLA Sunlu Red Transmission Distance: 5 PLA Bambu Lab Magenta Transmission Distance: 3.2 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Magenta At layer #21 (1.76mm) swap to Jade White for the rest.