About this 3D model

I do my hueforge prints fairly thick.. so they take quite a while. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 1.6 PLA BambuLab Matte Dark Brown Transmission Distance: 1.9 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #13 (1.12mm) swap to Dark Brown At layer #20 (1.68mm) swap to Latte Brown At layer #25 (2.08mm) swap to Ivory White for the rest.