About this 3D model

Custom transport wheels for the electric smoker from Masterbuilt . Non-printable parts needed: Four 608ZZ bearing Two M6x35 mm bolt Two nuts on M6 bolt TODO list: Print (mine printetd with PLA+) Put two 608ZZ bearings to each side of wheel. Using vice or small hammer should help. Put a tube as an axle of wheel bearings. Place the wheel (with bearings and tube inside) between wheel supports in “corner” element. Put a M6 bolt. It should go through both screw holes in supports and go through the tube in the wheel. Secure bolt with a nut.