About this 3D model

This Flexi Hammerhead Shark is an articulated print-in-place model that needs NO supports. Included are 3 files:- Shark STL- Colored 3mf for Bambu Lab printers- Colored 3mf For Prusa Slicer Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience! Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports. Check the printer settings below. Please feel free to share images of your prints on this page, I would love to see 'em. Thank you. P.S. If you like this design, Check out my other models. https://www.myminifactory.com/users/FlexiFactory ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent. To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/FlexiFactory or https://www.myminifactory.com/users/FlexiFactory Please help support the creative work of each 3D artist and NEVER share or sell a digital file. 3D PRINTING SETTINGS: Easy Print. Can be scaled up PLA used for prints: AMOLEN Gold/Purple : https://a.co/d/iJnb1bPDURAMIC Denim: https://a.co/d/29yVJeHTTYT3D Copper: https://a.co/d/frkfGATZIRO Silk Silver: https://a.co/d/2yWgLbfTTYT3D: Fast Changing Rainbow: https://a.co/d/bf903OG3D PRINTING SETTINGSNo supports (adding supports will hinder functionality)15% infill3 walls.12 layer height for single color and .16 max for multi-color