About this 3D model

Venom: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4.1 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #16 (1.36mm) swap to Red At layer #19 (1.6mm) swap to Jade White for the rest.