About this 3D model

this is a hueforge wall art of some Palm trees with the sunset in the back ground. See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Sunlu Matte White Transmission Distance: 5 Swap Instructions: Start with Black At layer #11 (0.56mm) swap to Red At layer #22 (1mm) swap to Yellow At layer #32 (1.4mm) swap to White for the rest. please follow the settings in the bambu wiki seen below for best Results. (1) Adjust the min layer height to 0.04 mm. (2) Confirm specific process parameters