About this 3D model

Summary Ever needed to prop up your laptop or tablet at a more comfortable angle. This compact folding stand will prop up the laptop or tablet at approximately 18 degrees. The stand folds down to approximately 8.5 inches (220mm) x 0.75 inch (24mm). This is commercially available to purchase as well. But why not try printing one yourself :) This does require well calibrated printer due to the tight tolerance. There is an 0.4mm air-gap and do not use supports for this print. This took 9h55m at 0.2mm layer height and 15% infill. Happy printing :) Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 15 - 20 Filament material: PLA