About this 3D model

3d miniature of Munich, Germany! Model created in Blender using data primarily from the Blosm addon. Check out my collection of other miniature cities: https://makerworld.com/en/u/1935755220/collections/146964 European miniatures collection: https://makerworld.com/en/u/1935755220/collections/497061 Slicing & Printing Details This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail! Note : If roads or other small details disappear after slicing, enable “ Detect Thin Walls ” OR use Arachne walls (can also try lowering the extrusion/line width of external perimeters / outer walls closer to 0.4mm). The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print! Framing Details This model measures almost exactly 6.8in by 4.8in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs. Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ And blue printer paper: https://www.amazon.com/dp/B00006IDQT I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities. Gif of the Printable Frame w/ Water Plate A frame is not required! This model looks great by itself and can be displayed almost anywhere. See my Patreon for a commercial license, early downloads, polls towards future models, and more!