About this 3D model

These are versatile round & square pedestals I created for another application, but I realized others might also be able to use the pedestals themselves. The pedestals are easily modified directly within your slicer. The round base can be resized or even changed into an oval by resizing x and y dimensions differently. Similarly for the square base, it can be resized as a square or changed into a rectangular base. I’ve uploaded two different profiles for each shape, one for post-addition of weight and one to print and use as-is. 1) For use as-is: There are two profiles labeled “To Use As-is” that have typical grid infill. These are designed to be resized (if needed) and printed for use as-is. The profile infill is set at 15%, but this can be increase to raise the weight further. 2) For a heavier base: One profile for each shape is labeled “For Post-Filling”, which uses lightning infill with a slightly thicker wall. These models are almost entirely empty so a small hole can be drilled in the bottom and they can be filled with your choice of pourable filling material. I know many people like sand, which will work, but keep in mind it may crack open and spill if dropped. I personally like plaster of paris. It’s easy to pour in and it solidifies. If you like the model, please consider giving it a Boost. Enjoy!