About this 3D model

File is ready to print in case u want to change frame colour swap the last layer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic blue silk Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue silk or other blue At layer #16 (1.36mm) swap to Latte Brown At layer #22 (1.84mm) swap to Jade White for the rest. Reminder: My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model: *** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up. If u want to support my work https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT For request send me dm