About this 3D model

In 1962, while replacing original switches with FUGA® switches in my home, I encountered a problem. The old switches were 70mm wide. Using SOFTLINE 68 frames resulted in an unsightly gap between the wallpaper and the switch. I initially attempted to create my own wider frames. Unfortunately, I was dissatisfied with the finish achievable using an FDM printer, and ultimately abandoned them. I instead recommend this design: Simple 55 mm frame for LK FUGA Due to popular demand, my older files are available here. More updated models are available on Printables Printing Tips Remember that plastic shrinks as it cools. Therefore, you should enlarge the model to compensate for this shrinkage. PLA: 100.3% PETG: 100.4% ABS: 100.8% LK material color codes: White: RAL 9016 Light Grey: RAL 7035/9018 Anthracite Grey: RAL 7015/7016 Steel Metallic: RAL 9060 All models are oriented for optimal printing. The frame-soft files can be printed vertically. The rocker switch inserts are the only parts requiring support and are surprisingly robust. Legal Considerations If printing and using the models in a 230V installation, they must be certified for this purpose to ensure legal compliance. Some files closely resemble LK designs and may not be suitable for commercial use. Links ZigBee wall switches for FUGA Switch lock for 1½ module Cover plate for LK lamp outlet Wall mounting for Hue Dimmer Digital Museum of Plugs and Sockets