About this 3D model

This is to help heat up your chamber for when you print high temp filaments Your printer will need to be rooted to make this work. Fans will show 100% when they are off Printer.cfg [ temperature_fan bed_fans ] pin: !PA0 cycle_time: 0.0100 hardware_pwm: false max_power: 1 shutdown_speed: 0 sensor_type: EPCOS 100K B57560G104F sensor_pin: PC5 min_temp: 0 max_temp: 110 control: pid pid_Kp: 4.0 pid_Ki: 1 pid_Kd: 0.2 pid_deriv_time: 2.0 target_temp: 10.0 max_speed: 1.0 min_speed: 0.0 [ output_pin bed_fans ] pin: !PA0 pwm: True cycle_time: 0.0100 hardware_pwm: false value: 0.00 scale: 255 shutdown_value: 0.0 Orca Slicer Printer Settings Machine start G-code SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=mcu_fan TARGET=50 SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=bed_fans TARGET=10 Filament setting: end print SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=bed_fans TARGET=10 start print SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=chamber_fan TARGET=60 SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=bed_fans TARGET=60