About this 3D model
Disney Villains - a collection of Disney villain images to print and hang on your wall. Choose your favorite Disney villain from Hades, Gaston, Ursula, Maleficent, Cruella, Scar, Hook, The Evil Queen and Jafar... or print them all! Here are all the instructions for printing all the Hueforge separately: CRUELLA Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Yellow At layer #19 (1.6mm) swap to Bone White for the rest. THE EVIL QUEEN Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Blue Transmission Distance: 2.7 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #18 (1.52mm) swap to Bone White for the rest. GASTON Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Grey Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #19 (1.6mm) swap to Bone White for the rest. HADES Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Light Blue Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Light Blue At layer #19 (1.6mm) swap to Bone White for the rest. HOOK Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Coffee Transmission Distance: 3 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Coffee At layer #20 (1.68mm) swap to Bone White for the rest. JAFAR Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Red Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #16 (1.36mm) swap to Bone White for the rest. MALEFICENT Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Esun Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Yellow At layer #19 (1.6mm) swap to Bone White for the rest. SCAR Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Esun Orange Matte Transmission Distance: 2.5 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Orange Matte At layer #19 (1.6mm) swap to Bone White for the rest. URSULA Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Lilla Transmission Distance: 3.5 PLA+ Esun Bone White Transmission Distance: 6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Lilla At layer #19 (1.6mm) swap to Bone White for the rest.