About this 3D model

Ghost Rider: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #14 (1.2mm) swap to Blue Gray At layer #16 (1.36mm) swap to Scarlet Red At layer #18 (1.52mm) swap to Yellow At layer #21 (1.76mm) swap to Jade White for the rest.