About this 3D model

After top mounting my filament on the Anycubic Vyper, I noticed it would catch and snap back on the corner of the Z axis bar. I designed a guide to top mount between the two top screws using a 3mm x 10mm screw using DaVinnci2000s nut to lock into the track: https://www.thingiverse.com/thing:3050607 Printed on Anycubic Vyper Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Infill: 50% Filament: eSun PLA+ White Notes: Temps: first layer: 205C All other: 195C Bed: 60C Speed 70mm on perimeter Layer Height: 3mm 0.4mm nozzle 50% infill is probably overkill. Print time was 46 min Category: 3D Printer Accessories