About this 3D model

Explore various build options tailored to your preferences. The base build necessitates 14 M2 heat-set inserts and 14 M2x12mm bolts. The indents for bolt heads are 4mm in diameter; keep this in mind when selecting bolts. All builds require gasket material; I utilized foam window gaskets with pre-applied adhesive, but any 1.5-3mm soft foam will suffice. For an alternative to magnets, you can opt for gluing the parts together. The TRRS cover without a hole is designed for wireless builds. Option 1: No Magnets Article QTY Comment Regular Bottom 2 Print one mirrored in the slicer Regular Top Right 1 Regular Top Left 1 Plate 2 If you want a consistent top finish, mirror one in the slicer M2 Heat Set Inserts 14 M2x12 Bolts 14 Option 2: Some Magnets Article QTY Comment TRRS Cover Bottom 2 Print one mirrored in the slicer Regular Top Right 1 Regular Top Left 1 Plate 2 If you want a consistent top finish, mirror one in the slicer TRRS Cover (with or without hole) 2 Print one mirrored in the slicer Heat Set Inserts 14 M2x12 Bolts 14 3x3x1mm Magnets 16 For TRRS cover Option 3: All the Magnets (and Optional Tenting) Article QTY Comment TRRS Cover Bottom 2 Print one mirrored in the slicer. You may also use a non-cover bottom if you wish. If so, there's no need for 3x3x1mm magnets. Top Right w/ Feature 1 Top Left w/ Feature 1 Plate 2 If you want a consistent top finish, mirror one in the slicer TRRS Cover (with or without hole) 2 Print one mirrored in the slicer Either Feature Regular 2 Print one mirrored in the slicer or Feature Tilted 2 Print one mirrored in the slicer. Requires supports. Organic supports with automatic painting work great. Heat Set Inserts 14 M2x12 Bolts 14 3x3x1mm Magnets 16 For TRRS cover 5x5x2mm Magnets 16 For features