About this 3D model

Fan: dimension: 30x30x10mm hole distance: 24mm hole diamenter: 3mm You would need: 4x M3x12 screws option 1: electronic switch connected to Receiver https://www.aliexpress.com/item/1005003353247323.html option 2: soldering the +/- wires of the fan to +/- contacts Print parameters: ● Solid layers - Top / Bottom (0 layers) ● Fill angle: 90 degrees ● Infill density: 40% ● Infill type: Aligned Rectilinear ● Perimeters: 3