About this 3D model

I made the next small piece of my collection, of course there are versions in multi colors! :). The build plate guide helps you easily push the build plate to its exact location. An important aspect of the design was that it fit well, could be easily placed without much force, of course it should be easy to print and look good. Installation video in the description. According to my practical experience, it is enough to place it only on left side. I hope you like it too! Feel free to ask if you have any questions or comments! Boost Me If you want to support my work, you can do it with a boost! Thank you for your past and future support! The main features of the component: It easily slides the building plate into the exact location Practical It fits well Easy to install It is easy to print and the support is easy to remove single-color and multi-color versions are available Available profiles for ABS, PLA, PETG materials and yes, in my opinion, it turned out beautiful. :) Build Plate Guide Installation video: Installation is very easy, even with one hand. Remove video: Print: Quality: Layer height: 0.2 Wall Generator: Arachne Strength: Wall: 2 Filling density: 30 % Filling pattern: Adaptive cube Support: Enable Support: YES Style: Tight Remove small overhangs: NO Z distance: 0.15 Support/Object XY distance: 0.35 Do not use PLA material for printing if you use your printer with other high temp. materials. PETG, ABS, ASA materials are printed at a higher temperature, which PLA cannot withstand. I recommend using ABS, ASA or PETG material. Update: 2024.02.26. - V11 - Based on the first feedback, I adjusted the corner section a few tenths of a mm looser. I recommend the other pieces of my collection: Build Plate Guide Filament CLIP PTFE Tube Guide PTFE Tube clip Z-axis Bearing Shield for Bambu Lab X1/P1 series Dust cover Fan safety guard - Aux fan Build plate holder for X1/P1 series and A1 Build plate holder for H2D Build plate holder for A1 mini Scraper Poop Chute for X1 / P1 series Poop Chute for X1E Build Plate Guide Rounded